Step 1

Access device. Easiest way is to connect to device directly. Check the “Direct Connection” manual page for instructions on how to do that.

Step 2

Go to the device settings page. “Device Settings” is an option in the menu on the left hand side.

Screenshot 2023-07-18 at 3.03.25 PM.png

Step 3

Click “Edit” button and you will get to the IP configuration page.

Screenshot 2023-07-18 at 3.03.48 PM.png

Step 4

Scroll to bottom of the page and click the “Static IP” option. Here, you will set the OV20i to the desired Static IP address, as well as the Subnet Mask and Gateway. You can also optionally set the DNS. Once done, hit the “Save” button.

Screenshot 2023-07-18 at 3.04.36 PM.png

Step 5

Once saved, you will see this page. Please take note of the Static IP address you have saved. If you mistyped the IP address information it can be difficult to find the device.

Now restart the device and plug the OV20i into the factory network.

Screenshot 2023-07-18 at 3.05.07 PM.png

Step 6