1. Open System Settings.

  2. Navigate to Network to find ethernet to USB C dongle, in this case called “USB 10/100/1000 LAN”.

Screenshot 2023-06-13 at 4.42.48 PM.png

  1. Select USB-C Dongle to open up configurations.

  2. At default, IPv4 configuration will be set to “Using DHCP”.

  3. Hit Details to change IPv4 configuration

    Screenshot 2023-06-13 at 4.19.56 PM.png

  4. Change Configure IPv4 to Manually

Screenshot 2023-06-13 at 4.43.13 PM.png

  1. Fill in the following:
    1. In IP address, type in 192.168.0.10
    2. Ensure Subnet mask is 255.255.255.0, change if it is not
    3. Hit OK to save

Screenshot 2023-06-13 at 4.43.31 PM.png

  1. Set Network Service Order. This will allow wifi and the OV20i to be used at the same time.

    Set Network Service Order (MacOS)

  2. Navigate to http://192.168.0.100 on your web browser (Chrome is recommended)

<aside> 💡 Additional documentation can be found directly here: https://support.apple.com/guide/mac-help/change-tcpip-settings-on-mac-mh14129/13.0/mac/13.0

</aside>